|
|
|
PLATING EQUIPMENT
Tabletop Precious Metal Plating
System
You can now plate
in house and reduce the cost of outside plating vendors, shipping,
insurance, and most of all, uncontrollable waiting time. Now you
can control the quality, color, thickness, and so much more in the
convenience of your own facility. This is perfect for low to
medium volume productions.
Complete Systems start at only $1675 for a 4 Position. Includes all the hardware
shown including a rectifier. All you need to do is just add water
and your plating solutions
7 Position unit as shown below is $1875 and is only 48" wide. Easily fits on a table.
| Tabletop
Plating Systems available in 600, 1L and 2 Liter Capacity |
|
 |
Micro-Agitation Technology:
When plating rhodium, high powered micro-agitation will Improves
the white color and reflectivity of the rhodium plating by
depositing the rhodium in a more compact crystallization form.
This will also reduce the amount of plating time and improve the
equality of the rhodium deposit. It has also been noted that
quality plating can still be preformed when the bath is as low
as 1.0 grams/liter. This will allow you to get more for your
money out of every rhodium gram purchased. |
 |
This
system is ready to plate
silver, gold, rhodium, palladium, and more. This new line of
plating systems begins with the basic 600 ML ready to use glass
tank system, with all the standard equipment for a complete
precious metal plating operation. We have taken the high end
technology of the large bath plating operation and reduced the
size to a ready to use table top system. We provide step-by-step
instructions for set up, plating directions, system maintenance,
replacement parts order sheet, and the most comprehensive tech
support available anywhere.
|
|
 Click on the shopping cart to order
to place an order.
|
New
RHBW1 (rhodium brightener/whitener additive):
Our new additive increase the whiteness and brightness of
rhodium plating to an incredible level. This combination of pure
rhodium and a special mixture of additive is now available for
high end jewelry work such as diamonds in white gold. No more
gray rhodium! |
| |
|
 |
The
Bath Tracker 2000
is an ampere time counter specifically designed for
electroplating. It has two internal counters; one retains the
count and can not be reset or erased, so records will never be
lost for the life of the instrument. The other counter can be
reset to zero by holding the reset button for a second. Pressing
this button momentarily will switch the bright LED display from
the total count to the reset count. Status lights indicate which
counter is being displayed and hour or minute count units.
Accuracy is assured by factory set-up to your rectifier shunt.
Price $190
Click on the shopping cart to order
to place an order. |
| |
|
 |
The
Bath Alarm
is an ampere/time counter with an audible alarm or a relay
output that can be set to activate at a specific count. It is
typically used to control plating thickness by warning the
operator, or turning off the rectifier. Signaling the time for
chemical replenishment is another application. The instrument is
very easy for the plating line worker because the set-up
parameters are selected separately in a PC program and
downloaded to the instrument by a USB cable. Once this is done,
the worker just pushes the start button.
Price $375
Click on the shopping cart to order
to place an order. |
.
Learn about the Rhodium Revolution
|
