This two part silver epoxy offers high electrical conductivity and strong conductive bonding. Use in place of traditional soldering on heat sensitive components.

 

Good for repairing defective traces and creating jumpers on boards.

Can be used as an effective heat sink adhesive.

This Conductive Silver Epoxy comes in two 20g jars.

 

Minimum operating temp. -30°C ( -22 °F )

Maximum operating temp. 90°C ( 194°F )

Cure time @ 24°C (75°F) 4 hours

Cure time @ 65°C (150°F) 10 minutes

Working time @ 22°C 10 minutes

Volume resistivity @ 25°C 0.38 ohm · cm

Tensile strength 911 psi Elongation 0.3 %

Compressive Strength 1100 psi Flexural Strength 2,500 psi

Shear Strength 234 psi

Thermal Expansion 79.3 mm/106mm

Density 2.34 g/cm3

Bonds to glass, ceramics, metals, plastics, aluminum, bronze, magnesium, kovar, nickel and printed circuits boards.